304 316 329 Stainless Steel High Pressure Air Compressor Roots Blower
MVR Roots Steam Compressor
Our company's MVR roots steam compressors have been developed with air capacity from 5 m3/min to 130 m3/min. The maximum pressure difference between inlet and outlet is 58.8Kpa to 80Kpa.
Specific parameters are shown in the following table:
| Model | Air capacity
(m3/min) | Differential pressure
(Kpa) | Rotating speed
(rpm) |
| DFSR-100WN | 5-9 | 58.8-80 | 1000-1650 |
| DFSR-125WN | 10-22 | 58.8-80 | 870-1650 |
| DFSR-150AWN | 20-30 | 58.8-80 | 980-1580 |
| DFSR-200BWN | 24-45 | 58.8-80 | 930-1550 |
| DFSR-250WN | 45-76 | 58.8-80 | 750-1250 |
| DFSR-300WN | 75-130 | 58.8-80 | 750-1250 |
Note:
1. The air capacity in the table is measured when the pressure difference between the inlet and outlet is 40Kpa. The maximum allowable pressure difference of the actual MVR compressor can be:
A- FSR-250WN, FSR-300WN, the maximum allowable differential pressure is 60Kpa
B- FSR-100WN, FSR-125WN, FSRSR-200WN, FSRSR-250WN, the maximum allowable differential pressure is 80Kpa.
2. In the table, rotating speed is the recommended value. Don't try to exceed the range.
MVR process drawings
The following MVR process drawings are for reference only. According to the evaporation solute, the process is also different.
MVR roots steam compressor features
Shell: The inlet adopts spiral type. When the impeller rotates, the gas enters the shell through the spiral line to form a circular cavity, thus reducing the pulsation of the blower.
Material selection 304/316L/2205/HT200+Ni-P
Rotor: Three-leaf or two-leaf type, compound type line, Impeller area utilization factor 0.5, volume efficiency increases 5%, noise reduces about 5dB
Material selection 304/316L/2205/HT200+Ni-P
Wallboard: The surface is provided with a backflow groove. This structure can increase the compression ratio of the blower and can also help reduce the noise of the blower.
Material selection 304/316L/2205/HT200+Ni-P
Mechanical seal: Double-faced container-type mechanical seal, moving ring using silicon carbide or graphite, static ring using carbide steel, easy installation and maintenance, special design structure, use more reliable.
Bearings: Positioning bearings are NSK bearings that are imported from Japan.
Gears: High-precision grinding gears are used to reduce mechanical noise, and the accuracy reaches level 5 of the national standard GB/T10095-2008.
MVR Project
Production Workshop
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity.
B: Inlet pressure and outlet pressure.
C: Inlet temperature and outlet temperature.
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During the warranty period, replace the damaged parts for free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure continuous safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment
A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60,000 hours.
C- Service life of bearing is more than 50,000 hours.
D- Service life of gear is more than 60,000 hours.
4. What is your terms of packing?
A: Generally, we pack our goods in Fumigation Free Plywood Case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality?
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6.What are your terms of payment?
1. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
2. 100% IRREVOCABLE L/C AT STGHT.
